Articles on: Mechanical Bulls

What are the power requirements of the mechanical bull?

The system operates from 110 volts single phase electricity at 60htz. drawing 16 amps. The 1 horsepower blower for the inflatable operates from 110 volts single phase electricity at 60htz. drawing approximately 10to 12 amps.

Therefore you will need 2 separate 20 amp outlets on separate breakers to operate the mechanical bull safely. We can bring extra extension cords, but have a plan for where the two cords will be setup. Most outside breakers of a house utilize the same breaker, so you may need to open a window or backdoor.

If you have general questions we are available for chat 24hrs a day. Call us at (281) 606-5867 or nationally at 1-855-627-7594 Email responses within 24hrs available at reservations@skyhighpartyrentals.com


If an inflatable collapses, exit children and check the electrical breaker. Most times the breaker will turn off from too much power. If Wind speeds exceed 15mph turn the inflatable off and exit the inflatable. Supervision is required at all times

Before renting an inflatable, call 811 to have water lines flagged. Only allow us to setup away from sprinkler lines. We are not responsible for damage to sprinkler lines, especially after staking inflatables down to the ground where you ask.

Gate entrances must be 3.5ft wide or larger for most inflatables. We are not responsible for damage to gates that are severely rusted or rotting during transportation of the inflatable. We are not responsible for damage to grass during transportation or normal use of an inflatable.

Updated on: 26/06/2022

Was this article helpful?

Share your feedback

Cancel

Thank you!