Articles on: Water Activites

How to prepare for a water slide.

First make sure there is a water hose nearby where the inflatable will be setup. If your inflatable is wet/dry a misting hose should be attached to the inflatable. We will attach your water hose to our misting hose once any pools are filled up.

You are responsible for providing a water source and water hose to all inflatables you rent from us. If you are renting more than one inflatable, you may need a splitter to get each water hose to the designated water slide. Inflatable sometimes must be farther apart from each other based off size and constraints. So prepare to have extra water hoses handy to speed up set up of your party rental.

If you have general questions we are available for chat 24hrs a day. Call us at (281) 606-5867 or nationally at 1-855-627-7594 Email responses within 24hrs available at reservations@skyhighpartyrentals.com

If an inflatable collapses, exit children and check the electrical breaker. Most times the breaker will turn off from too much power. If Wind speeds exceed 15mph turn the inflatable off and exit the inflatable. Supervision is required at all times

Before renting an inflatable, call 811 to have water lines flagged. Only allow us to setup away from sprinkler lines. We are not responsible for damage to sprinkler lines, especially after staking inflatables down to the ground where you ask.

Gate entrances must be 3.5ft wide or larger for most inflatables. We are not responsible for damage to gates that are severely rusted or rotting during transportation of the inflatable. We are not responsible for damage to grass during transportation or normal use of an inflatable.

Updated on: 23/06/2022

Was this article helpful?

Thank you!